<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>重工电子论坛 - 模拟电路</title>
    <link>http://www.cqutlab.cn/forum-50-1.html</link>
    <description>Latest 20 threads of 模拟电路</description>
    <copyright>Copyright(C) 重工电子论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 15 Apr 2026 02:50:18 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.cqutlab.cn/static/image/common/logo_88_31.gif</url>
      <title>重工电子论坛</title>
      <link>http://www.cqutlab.cn/</link>
    </image>
    <item>
      <title>电子行业各种换算工具</title>
      <link>http://www.cqutlab.cn/thread-4206-1-1.html</link>
      <description><![CDATA[http://www.elecfans.com/tools/]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Wed, 13 Apr 2022 06:39:10 +0000</pubDate>
    </item>
    <item>
      <title>单运放电流采样，加偏执电压问题</title>
      <link>http://www.cqutlab.cn/thread-4190-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Mon, 14 Dec 2020 02:53:33 +0000</pubDate>
    </item>
    <item>
      <title>单一启动信号问题</title>
      <link>http://www.cqutlab.cn/thread-425-1-1.html</link>
      <description><![CDATA[这里考虑一个下降沿触发，触发器直接仿真用74121，



当然实际电路为了方便，我们用74HC123（里面有两个RS触发器）]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Fri, 23 Nov 2018 14:13:11 +0000</pubDate>
    </item>
    <item>
      <title>为什么用手接触示波器探头正极，会出现50Hz工频干扰</title>
      <link>http://www.cqutlab.cn/thread-418-1-1.html</link>
      <description><![CDATA[用手去接触示波器会出现一个50Hz的工频信号，之前遇到过，但是都阴错阳差的解决了，但是这次绕不开了，我想知道这到底是如何引入的，或者能画个等效图解释下

这里百度到如下信息
https://blog.csdn.net/luckywang1103/article/details/17585305  这个帖子说了大概过 ...]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Thu, 15 Nov 2018 10:31:10 +0000</pubDate>
    </item>
    <item>
      <title>DCDC buck的记录</title>
      <link>http://www.cqutlab.cn/thread-328-1-1.html</link>
      <description><![CDATA[今天做个DCDC，最先做了个，感觉还可以，但是电感封装画错了，就不得行了，结果又画了个，纹波杠杠的大。。。。示波器测试之，发现输入和输出的地方，电容一定要离块子近，不然纹波大惨，能有好近走好近。。。。明天从来过。。]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Wed, 14 Feb 2018 15:09:53 +0000</pubDate>
    </item>
    <item>
      <title>硬件相关博客</title>
      <link>http://www.cqutlab.cn/thread-318-1-1.html</link>
      <description><![CDATA[http://blog.csdn.net/pan0755/article/details/74454344

运放的几个概念
https://blog.csdn.net/dog0138/article/details/7476889]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Mon, 08 Jan 2018 09:02:06 +0000</pubDate>
    </item>
    <item>
      <title>MOS管相关问题</title>
      <link>http://www.cqutlab.cn/thread-317-1-1.html</link>
      <description><![CDATA[https://wenku.baidu.com/view/008e60800722192e4436f644.html

这篇驱动讲得语言很有意思
https://wenku.baidu.com/view/ae727da5caaedd3382c4d3b9.html]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Tue, 02 Jan 2018 14:01:16 +0000</pubDate>
    </item>
    <item>
      <title>一个可调频率的方波发生器电路分析</title>
      <link>http://www.cqutlab.cn/thread-311-1-1.html</link>
      <description><![CDATA[今天有个同学来问我一个问题，说是作业需求，分析一个电路的原理，原理图直接上图

然后问这个电路是干啥子用的，最后我概括为调节滑动变阻器R1，R2的阻值，去改变发生的方波频率，其中，R1是粗调，R2是细调，也就是说动R1的话，整个频率调整就大，动R2的话，R2是基于 ...]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Tue, 28 Nov 2017 16:31:57 +0000</pubDate>
    </item>
    <item>
      <title>快速光电池</title>
      <link>http://www.cqutlab.cn/thread-252-1-1.html</link>
      <description><![CDATA[https://item.taobao.com/item.htm?spm=a1z10.5-c.w4002-7493465764.17.1ea1f6abQ7udYP&amp;id=40995036267&amp;qq-pf-to=pcqq.c2c
OSRAM硅光电池 KOM2125 波长400nm ~ 1100nm 受光面2mm*5mm]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Sat, 12 Aug 2017 12:21:37 +0000</pubDate>
    </item>
    <item>
      <title>简易滤波计算</title>
      <link>http://www.cqutlab.cn/thread-227-1-1.html</link>
      <description><![CDATA[http://www.sydzdiy.com/base/theory/0504T22009.html]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Mon, 06 Mar 2017 06:17:31 +0000</pubDate>
    </item>
    <item>
      <title>阻抗匹配</title>
      <link>http://www.cqutlab.cn/thread-211-1-1.html</link>
      <description><![CDATA[功放和音响的阻抗匹配]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Sat, 24 Dec 2016 08:57:06 +0000</pubDate>
    </item>
    <item>
      <title>【毕设】无线充电谐振</title>
      <link>http://www.cqutlab.cn/thread-210-1-1.html</link>
      <description><![CDATA[结合LC振荡电路的特点，我们可以用电感的互感来理解。在SGTC中，假设初级和次级固有频率相同，在没有次级线圈时发射端由于ＬＣ振荡向外发射少许能量（电磁辐射）；当在一定区域内加入次级时，次级线圈由于开始时该区域内少许的电磁波能量而产生电流，这将使初级线圈的电 ...]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Fri, 23 Dec 2016 14:56:55 +0000</pubDate>
    </item>
    <item>
      <title>单电源供电运放的偏置和去耦电路设计</title>
      <link>http://www.cqutlab.cn/thread-190-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Sun, 16 Oct 2016 13:08:35 +0000</pubDate>
    </item>
    <item>
      <title>为何要大小电容并联做电源滤波</title>
      <link>http://www.cqutlab.cn/thread-166-1-1.html</link>
      <description><![CDATA[大电容由于容量大，所以体积一般也比较大，且通常使用多层卷绕的方式制作，这就导致了大电容的分布电感比较大（也叫等效串联电感，英文简称ESL）。 电感对高频信号的阻抗是很大的，所以，大电容的高频性能不好。而一些小容量电容则刚刚相反，由于容量小，因此体积可以做 ...]]></description>
      <category>模拟电路</category>
      <author>李钢-15级</author>
      <pubDate>Sun, 10 Jul 2016 07:17:53 +0000</pubDate>
    </item>
    <item>
      <title>简单FIR例子</title>
      <link>http://www.cqutlab.cn/thread-165-1-1.html</link>
      <description><![CDATA[做FIR 仿真   遇到个简单概念性问题 希望得到解答
总体问题描述：
我设计一个低通滤波器 127阶（MATLAB算出来的）  截止频率1K  目的是为了 滤去高频信号   
我信号源是 一个900HZ和1200HZ相加  幅值都是0V-3V   这个相加后的信号 通过滤波器后 还原到900HZ的信号
 ...]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Fri, 01 Jul 2016 12:22:36 +0000</pubDate>
    </item>
    <item>
      <title>微带线和带状线相关作用</title>
      <link>http://www.cqutlab.cn/thread-159-1-1.html</link>
      <description><![CDATA[微带线和带状线(microstrip and stripline)

1.微带线是一根带状导(信号线)．与地平面之间用一种电介质隔离开。如果线的厚度、宽度以及与地平面之间的距离是可控制的，则它的特性阻抗也是可以控制的。

2.带状线是一条置于两层导电平面之间的电介质中间的铜带线。 ...]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Sun, 05 Jun 2016 17:15:05 +0000</pubDate>
    </item>
    <item>
      <title>如何做到共模衰减的？</title>
      <link>http://www.cqutlab.cn/thread-158-1-1.html</link>
      <description><![CDATA[以下是扼流圈的作用  它是怎么抑制住共模尖峰噪声的？]]></description>
      <category>模拟电路</category>
      <author>李维强-15级</author>
      <pubDate>Sun, 05 Jun 2016 16:30:20 +0000</pubDate>
    </item>
    <item>
      <title>PCB打板时镀锡线的画法</title>
      <link>http://www.cqutlab.cn/thread-123-1-1.html</link>
      <description><![CDATA[在PCB走线需要过很大电流时可以采用在走线上镀锡的做法来加大走线的电流承受能力。附件中的文件说明了我们在画图时需要如何处理工厂才不会在需要镀锡的线上盖绿油。javascript:;]]></description>
      <category>模拟电路</category>
      <author>陈思宇</author>
      <pubDate>Sun, 21 Feb 2016 14:29:31 +0000</pubDate>
    </item>
    <item>
      <title>PCB制图的中开孔和开槽方法</title>
      <link>http://www.cqutlab.cn/thread-122-1-1.html</link>
      <description><![CDATA[在工厂去打板时可能需要在板子上开比较大的孔或者槽。附件中的文件有详细说明画图时需要怎么画，工厂才能识别我们的意图。]]></description>
      <category>模拟电路</category>
      <author>陈思宇</author>
      <pubDate>Sun, 21 Feb 2016 14:22:20 +0000</pubDate>
    </item>
    <item>
      <title>一款低电压差LDO芯片MIC2920A-3.3WS</title>
      <link>http://www.cqutlab.cn/thread-121-1-1.html</link>
      <description><![CDATA[根据负载电流不同输入输出压差为150mV-750mV，详见附件中的数据手册。]]></description>
      <category>模拟电路</category>
      <author>陈思宇</author>
      <pubDate>Sun, 21 Feb 2016 14:10:59 +0000</pubDate>
    </item>
  </channel>
</rss>